Speaker Grille Recover
By: Rollie91
(From: http://www.preludepower.com/forums/showthread.php?p=813097#post813097)

Link to this page:

BACK TO PRELUDE3G.COM HOME

Since my car is off getting painted. I thought I'd clean up the door panels a little bit, and after 15 years they really show their age. I just removed the old speaker cloth from the covers, and re-covered them with new black speaker cloth from Fabricland.

Before:

What you need:

- Enough cloth for both doors (2ft x 2ft) roughly enough
- Any kind of spray adhesive (elmer's)
- Scissor's
- Chalk to outline the cut line
- Phillips screw driver

Remove the old cloth from the cover, and face both back sides of the cloth together and trace the outline onto the new cloth. Once its cut out spray one edge on the backside of the cover and stick the cloth to it, and hold it until its secure. Now spray the front of the cover and work your way around with the cloth then do the same for the rest of the backside of the cover. It sticks really good and only takes about 15 seconds to dry.

After:


BAD91SI I recommend you do this instead of trying to dye the cloth.

Let me know if this is a good write-up, because its my first.
Thanks, and good luck.