Opening Broken Glove box
By: Snowman (Craig)
(From: http://www.preludepower.com/forums/showthread.php?t=191384)
Link to this page:
BACK TO PRELUDE3G.COM HOME
Alright,
I have seen a few people post topics about not being able to get their glove
boxes open for various reasons. (Broken handles, etc)
This is how I did it:
Items needed:
-Coat hanger
-Pliers
Steps:
1. Using the pliers, bend the hanger so that there is a "J" shaped
hook on the end about 1/2"-3/4" wide.
2. Put the bent hanger into the center top of the glove box so that the hook
goes in between here: (the whole "J" part)
You cannot see this when its closed, but that will give you an idea of what it looks like.
3. Turn the hanger so that the end of the "J" hook pushes down on
this:
It may take some wiggling, but it will eventually push that down and release
the latch.
GOOD LUCK!