Single Wiper Conversion
(Crap I cant rember where I got this, if someone knows pls e-mail me.)
Single Wiper Conversion:
Please note that this mod is for "looks" and "cool factor"
only. In some cases it might even decrease wiper effectiveness. The project
is very simple and sould take no more then 5 minutes to complete.
Install: First flip up both wiper blade arms, like when you wash the car or
change the blades. This makes it easier to remove. You will see that each
wiper blade arm is held on by a 14mm nut. Pop the hood to gain access to the
nut on the drivers side. Remove the Driver side wiper blade completly and
set it aside. Then remove the nut on the passenger side wiper blade. Pull
up on the passenger blade, and position it so that it's at roughly a 45 degree
angle. Retighten the nut and test the motion of the blade by turning on the
wipers. Keep adjusting until the blade goes completely over to the driver
side without hitting the anything.
The driver side wiper blade is longer then the passenger, so I switched them
(the actualy wiper blade, not the arm that connects to the car). I've heard
that people have used up to 24" blades.